Attach a camera back transmitter to a camera

Use an appropriate BSI camera back to attach the camera back transmitter to the camera.

The following procedure describes how to attach a camera back transmitter to a Sony camera using a BSI camera back (20005-9-002).

1. Attach the shoe assembly, V edge (1), to the camera using four M3 x 10 screws.

   Alternatively, attach a BSI camera shoe (3) to the camera using four M3 x 10 screws.

   

2. Attach the lower hook (2) to the camera using two M3 x 6 screws.
3. Attach the camera back (4) to the camera. To do this slide the V wedge on the camera back into the shoe assembly and the lower mounting block into the lower hook. If you are using a BSI camera shoe, secure the V wedge with an M5 x 25 screw.

   

   

4. Attach mounting studs to the side of the camera back transmitter (5) using M5 x 15 flat head socket cap screws.

   

5. Align the mounting studs with the holes in the mounting bracket and engage the camera back transmitter (5). Push the transmitter latch up and close the safety latch.

   

6. Attach the battery (6) to the camera back.

   

7. Insert the return video receiver (7) into the slot in the camera back. The receiver clips into place.
8. Attach the power cables to the camera, camera back transmitter and return video receiver.