Change an RF module

You can change the Real Freedom Camera Back Transmitter’s RF module to operate in a different frequency band.

To change an RF module, follow these steps:

1. Disconnect all cables from the camera back transmitter and detach the transmitter from the camera.
2. Disconnect the UHF and RF antennas from the transmitter.
3. Unscrew the five screws securing the RF module to the digital module assembly.
4. Gently pull the RF module to release it from the digital module assembly.
5. Place the RF module in a safe place.
6. Position the new RF module and push down gently to engage the connector.
7. Tighten the five screws to secure the RF module to the digital module assembly.
8. Connect the UHF and RF antennas to the camera back transmitter.
9. Reconnect the cables and attach the camera back transmitter to the camera.