Status LEDs

Use the LED indicators on the camera back transmitter to help you to determine whether the transmitter is operating correctly.

Table 1. Camera back transmitter LED status indications

LED	LED state	Meaning
ALARM	Green	The camera back transmitter is operating normally.
	Red	There is an error or problem with the camera back transmitter.
RSSI	Green	There is a good signal between the data transmitter and the camera back transmitter.
	Red	The camera control frequency is set incorrectly at the data transmitter, or the camera back transmitter is too far away from the data transmitter to pick up the control data.
VIDEO	Green	There is active video input from the camera into the camera back transmitter.
	Red	There is no connection or active video input from the camera.
RF STAT	Green	The RF module is operating normally.
	Red	There is a problem with the RF module.