Installation using a ¼-20 UNC mount

Mount a data transmitter on a standard Manfrotto lighting stand, camera mount, repro arm, magic arm, clamp, or Dado kit using a ¼-20 camera mount screw.

Figure 1. Data transmitter ¼-20 UNC mounting screws (yellow)


  1. If not already attached, attach the mounting bracket to the back of the data transmitter using the four screws (M3 x 8) provided.

    Do not overtighten the screws as it may result in thread damage.

  2. Either thread a ¼-20 screw through the screw hole in the mounting bracket into the hole in the mount or screw the data transmitter onto the mounting screw.
  3. Tighten to secure the data transmitter.