Home
Products
Product manuals and datasheets of BSI products.
Data Transmitter
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
Data Transmitter Manual
This manual contains safety information and information for installing, configuring, and operating a Data Transmitter (IDT‑4349‑3U).
Data Transmitter
Troubleshooting
This chapter provides troubleshooting information for Real Freedom Data Transmitters.
Status LED issues

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
  - Data Transmitter Manual
    This manual contains safety information and information for installing, configuring, and operating a Data Transmitter (IDT‑4349‑3U).
    - Data Transmitter
      - Introduction
        The Real Freedom Data Transmitter is an important component of BSI’s Real Freedom wireless camera system which allows you to remotely control up to six Real Freedom Camera Back Transmitters and to provide camera control of most brands of broadcast camera.
      - Installation and configuration
        Designed to be compact and fully weatherproof, the Real Freedom Data Transmitter connects to any remote downconverter enabling the unit to be placed almost anywhere.
      - Operation
        Once connected to the system and configured, no further changes are required to the Real Freedom Data Transmitter during the routine operation of the Real Freedom system.
      - Troubleshooting
        This chapter provides troubleshooting information for Real Freedom Data Transmitters.
        Status LED issues
        Performance issues
        Camera control issues
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Real Freedom Data Transmitters.
      - Technical data
        Technical drawings, specifications, and connector pinouts for the Real Freedom Data Transmitter.
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
  - Datasheet
    The Real Freedom Data Transmitter allows you to remotely control up to six Real Freedom Camera Back Transmitters and to provide camera control of most brands of broadcast cameras.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Status LED issues

Use the information in the following table to help you troubleshoot data transmitter status LED issues.

Table 1. Troubleshooting LED states
Symptom	Possible cause	Actions
Status LED is off.	No DC voltage at the data transmitter.	Check that the LED on the downconverter is green indicating that it is powered. If not, go to the receiver and check the downconverter and data transmitter configuration options. Try connecting the data transmitter to a different downconverter. If still faulty, call Technical Support.
Status LED is off.	Faulty LEMO cable.	Check the LEMO data cable. Replace the cable with a new or known good cable and recheck the LED. If still faulty, call Technical Support.
Status LED is red.	No comms data from receiver.	Check the receiver’s settings and confirm that Camera Control is enabled. Refer to the Receiver Product Manual for details. Recheck the LED.
Status LED is red.	Faulty LEMO cable.	Change the LEMO cable. If still faulty, call Technical Support.