Installation using ¼-20 UNC mounts

Temporarily mount a downconverter on a standard Manfrotto lighting stand, camera mount, repro arm, magic arm, clamp, or Dado kit using a ¼-20 camera mount screw.

Figure 1. Downconverter ¼-20 UNC mounting screws (yellow)


  1. If not already attached, attach the mounting bracket to the back of the downconverter using the four screws (M3 x 8) provided.

    Do not overtighten the screws as it may result in thread damage.

  2. Either thread a ¼-20 screw through the screw hole in the mounting bracket into the hole in the mount or screw the downconverter onto the mounting screw.
  3. Tighten to secure the downconverter.