Introduction

The Real Freedom Fiber Antenna Extender provides unparalleled flexibility of operation. Multiple RF cameras incorporating camera control may be deployed from a single remote site utilizing just a single SMPTE hybrid fiber cable.

The system consists of a fiber base unit (IFB-3211) which integrates with a Real Freedom Receiver for command and control along with a fiber remote unit (IFR-3211). Both units are fully weatherproof and are linked together by a single SMPTE hybrid or single mode dual fiber cable.

The Real Freedom Fiber Antenna Extender incorporates an SDI/ASI return video channel from the base unit to the remote unit and allows you to simultaneously extend camera control and receive antennas by up to 2 km / 1.5 miles with a single hybrid fiber cable. Providing power to remote Real Freedom Downconverters and Data Transmitters over hybrid fiber cable, the system supports multiple RF cameras with a single SMPTE cable.

The system’s intelligent connectivity notifies the Real Freedom Receiver of the presence of the Real Freedom Fiber Antenna Extender within the network, including the status and control of any attached Real Freedom Data Transmitters and Downconverters. Fiber optic signal levels and real-time health check reporting are displayed on the receiver, alerting you when RF performance is affected. Up to six Real Freedom Receivers can be simultaneously supported by a single fiber base unit when utilized with the optional Real Freedom Active UHF Splitter.