Attach a camera back transmitter to a camera
Use an appropriate BSI camera back to attach the 4K camera back transmitter to the camera.
The following procedure describes how to attach a 4K camera back transmitter to a Sony camera using a BSI camera back (20005-9-002).
- Attach the shoe assembly, V edge (1), to the camera using four M3 x 10 screws.
Alternatively, attach a BSI camera shoe (3) to the camera using four M3 x 10 screws.
- Attach the lower hook (2) to the camera using two M3 x 6 screws.
- Attach the camera back (4) to the camera. To do this slide the V wedge on the camera back
into the shoe assembly and the lower mounting block into the lower hook. If you are using a
BSI camera shoe, secure the V wedge with an M5 x 25 screw.
- Attach mounting studs to the side of the 4K camera back transmitter (5) using M5 x 15 flat
head socket cap screws.
- Align the mounting studs with the holes in the mounting bracket and engage the 4K camera
back transmitter (5). Push the transmitter latch up and close the safety latch.
- Attach the battery (6) to the camera back.
- Insert the return video receiver (7) into the slot in the camera back. The receiver clips into place.
- Attach the power cables to the camera, 4K camera back transmitter and return video receiver.