Home
Products
Product manuals and datasheets of BSI products.
Active UHF Splitter
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
Active UHF Splitter Manual
This manual contains safety information and information for installing, configuring, and operating a Real Freedom Active UHF Splitter (ISP‑3261).
Active UHF Splitter
Operation
Once connected to the system and configured, no further changes are required to the Real Freedom Active UHF Splitter during the routine operation of the system.
UHF splitter status LEDs

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
  - Active UHF Splitter Manual
    This manual contains safety information and information for installing, configuring, and operating a Real Freedom Active UHF Splitter (ISP‑3261).
    - Active UHF Splitter
      - Introduction
        The Real Freedom Active UHF Splitter is an optional component to add additional functionality to the Real Freedom Fiber Antenna Extender system.
      - Installation and configuration
        This chapter contains the installation instructions for the Real Freedom Active UHF Splitter.
      - Operation
        Once connected to the system and configured, no further changes are required to the Real Freedom Active UHF Splitter during the routine operation of the system.
        UHF splitter status LEDs
      - Troubleshooting
        This chapter provides troubleshooting information for the Real Freedom Active UHF Splitter.
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for the Real Freedom Active UHF Splitter.
      - Technical data
        Technical drawings and connector pinouts for the Real Freedom Active UHF Splitter.
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

UHF splitter status LEDs

Use the LED indicators (A and B) on the Real Freedom Active UHF Splitter to help you to determine whether the splitter is in active or passive split mode.

Table 1. Active splitter LED indications
Condition	Description
RED (SLOW FLASH)	PASSIVE SPLIT MODE The splitter unit is powered from the Real Freedom Receiver and is in the passive split state. This is the normal mode of operation which can be controlled from the Real Freedom Receiver.
GREEN (SLOW FLASH)	ACTIVE SPLIT MODE The splitter unit is powered from the Real Freedom Receiver and is in the active split state. The active state introduces extra gain into the system which can be controlled from the Real Freedom Receiver.
OFF	UN-POWERED MODE The splitter unit is not powered from the Real Freedom Receiver on BNC 1. The splitter will still operate in a passive mode but will not appear on the receiver’s Connection Map.