Installation using ¼-20 UNC mounts
Mount a fiber base or fiber remote unit on a standard Manfrotto lighting stand,
camera mount, repro arm, magic arm, clamp, or Dado kit using a ¼-20 camera mount
screw.
Note: Fiber units are usually supplied with a Manfrotto
¼” to 5/8” adaptor (part number: 195) to go from the ¼-20 mount to a Manfrotto super
clamp (part number: 035C).
- If not already attached, attach the mounting bracket to the back of the
fiber base or fiber remote unit using the four screws (M3 x 8) provided.
Do not overtighten the screws as it may result in thread damage.
- Either thread a ¼-20 screw through the screw hole in the mounting bracket into the hole in the mount or screw the fiber unit onto the mounting screw.
- Tighten to secure the fiber base or fiber remote unit.