Home
Products
Product manuals and datasheets of BSI products.
Mini-Tx UHD
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
MT-UHD Manual
This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
Mini-Tx UHD
Maintenance
This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
  - MT-UHD Manual
    This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
    - Mini-Tx UHD
      - Introduction
        The award winning Mini-TX UHD is the world's smallest ultra-low latency UHD wireless video transmitter on the market, measuring just 85mm long by 56mm wide and 28mm deep.
      - Installation
        This chapter contains the installation instructions for the Mini Tx UHD.
      - Transmitter Configuration
        Once powered, use the joystick on the Mini Tx UHD to configure the transmitter and view status information.
      - Operation
        Once connected and correctly configured, no further changes are generally required to the Mini-Tx UHD during routine operation.
      - Troubleshooting
        This chapter provides troubleshooting information for the Mini Tx UHD.
      - Update the transmitter’s firmware
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.
      - Technical Data
      - Safety and regulatory compliance
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Maintenance

This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.

Routine maintenance procedures

You should perform the following maintenance procedures on a regular basis.

Warning: The Mini Tx UHD does not contain user serviceable parts. Warranty is void if the device is opened. Refer servicing to qualified BSI personnel only.

Performance monitoring

It is recommended that you periodically monitor the overall performance of the Mini Tx UHD and system. If you experience failure or deterioration in the performance of the system, check cables and adapters, input, and output connectors for damage.

Visual inspection

Depending on operating environments and use, periodically inspect the Mini-Tx UHD for signs of damage, dirt, or corrosion. Check that all markings and warning labels are in good condition.

Cleaning

If necessary, use low-pressure compressed air cleaning to remove small particles and debris from the surface of a Mini-Tx UHD.

Clean connector surfaces with a cotton swab moistened with a small quantity of alcohol. Use a lint‑free cloth to wipe connector surfaces after cleaning.

CAUTION: Do not use abrasive cleaners.

Storage

Store a Mini-Tx UHD either attached to the camera or in a safe location.

For long term storage:

Disconnect all cables from the Mini Tx UHD.
Detach the Mini Tx UHD from the camera.
Remove the antennas.
Cover the connectors with suitable dust covers.
Place the Mini Tx UHD in protective packaging and store in a cool, dry environment.