Mounting procedure for a single receiver

To mount the receiver, you will require 2RU (3.5 inches, 89 mm) of vertical rack space and a Real Freedom Single Receiver Rack Mount Kit (BRK-0005-00).

1. Attach the Bracket Fixing 2U to each side of the receiver using four M5 x 12 Phillips screws.

   

2. Attach the Rack Mount Spacer to the Bracket Fixing 2U using two M5 screws.

   You can install the spacer on the left or right side of the receiver. If you are installing the receiver in a half-width rack, no spacer is required.

   

3. Install the receiver at the desired location in the equipment rack and secure to the vertical uprights using four rack screws.