Home
Products
Product manuals and datasheets of BSI products.
Real Freedom Receiver
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
Receiver Manual
This manual contains safety information and information for installing, configuring, and operating a Real Freedom Receiver (IRX‑3811 and IRX‑3812).
Receiver
Receiver configuration
Once you have connected all the Real Freedom components and made the connections to the Real Freedom Receiver, you must enter some basic configuration information. If the camera is live, you should see a preview of the video on the receiver’s screen, which can help during the configuration process.
Network configuration

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
  - Receiver Manual
    This manual contains safety information and information for installing, configuring, and operating a Real Freedom Receiver (IRX‑3811 and IRX‑3812).
    - Receiver
      - Introduction
        The Real Freedom wireless camera system is designed to provide an end-to-end wireless video and audio link for professional television broadcast applications.
      - Location and functions of parts
        This chapter provides an overview of the components and connectors on the front and rear panels of the Real Freedom Receiver.
      - Installation
        This chapter contains the installation instructions for the Real Freedom Receiver.
      - Receiver configuration
        Once you have connected all the Real Freedom components and made the connections to the Real Freedom Receiver, you must enter some basic configuration information. If the camera is live, you should see a preview of the video on the receiver’s screen, which can help during the configuration process.
        Overview
        Before you start
        Network configuration
        Network configuration notes
        Camera control settings
        Receive settings
        Remote transmitter control settings
        Fiber remote and splitter settings
        Video settings
        Audio settings
        Other settings
      - Operation
        Once connected and correctly configured, no further changes are generally required to the system during routine operation.
      - Troubleshooting
        This chapter provides troubleshooting information for Real Freedom Receivers.
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Real Freedom Receivers.
      - Configuration menu structure
        The following diagram shows the receiver’s configuration menu options.
      - Accessories and spares
        The accessories and fuses for the Real Freedom Receiver.
      - Technical data
        Technical drawings, specifications, and connector pinouts for the Real Freedom Receiver.
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
  - Datasheet
    The Real Freedom Receiver is a next generation Integrated Receiver Decoder (IRD) comprising up to eight UHF inputs, DVB-T and T2 demodulators, and both MPEG-2 and H.264 video decoders.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Network configuration

You need to set the Internet Protocol (IP) address of the receiver and the subnet/network mask and gateway address to establish a connection to the RCP. To define the receiver’s network settings, you will require the network configuration details from the RCP.

From the main menu, select Settings and then select Network Configuration and configure as follows.

Table 1. Network configuration settings
Setting	Description
Use DHCP	Specifies whether to dynamically assign an IP address and other network configuration parameters to the receiver. Clear this check box to disable DHCP while only running static IP addresses, installing a device that runs DHCP and there is already a DHCP server on the network, and while configuring network settings.
IP Address	Enter the required IP address (for example,192.169.040.101) to identify the receiver on the network. When connecting the receiver to another point, the same IP address must be used except the last subnet number which can be any number between 0 to 254. This IP address must match the subnet of the OCP/RCP. For a Sony RCP, the IP address is the same as the Target Address with the RCP set to Bridge mode.
Network Mask	Enter the required subnet/network mask (for example, 255.255.255.0). This must be the same as the RCP’s subnet mask.
Gateway Address	Enter the required gateway address. This must be the same as the RCP’s gateway address and is the address of the router interface that is connected to the network.