Audio
From the main screen, tap Audio and configure as follows.
| Setting | Description |
|---|---|
| Channel 1-2 | Source Sets the source of audio on channel 1-2. Use ‘Test Tone’ to test and align the audio gain and losses. |
|
Stream Defines the format used to stream the recorded audio through a network connection. Select the required format or leave this set to ‘Off’. |
|
| Channel 3-4 | Source Sets the source of audio on channel 3-4. Use ‘Test Tone’ to test and align the audio gain and losses. |
Stream Defines the format used to stream the recorded audio through a network connection. Select the required format or leave this set to ‘Off’. |
|
| Phantom Power |
Phantom is used to enable phantom power by channel if required by the microphone. Note that when you use a stereo microphone that requires phantom power, you must switch on BOTH channels for phantom power (Phantom Ch 1 and Phantom Ch 2). |