Main configuration page

The information and settings on the main configuration page are as follows:

1. Displays diagnostic information.
2. Displays the settings for the selected transmission standard (DVB-T or DVB-T2). Tap the area above the text to change the standard and settings. In the example, V: 16.4 Mb/s is the video bit rate, and 18.1 is the overall bitrate including video and audio.
3. Displays the transmit power and frequency. Tap the transmit icon to define advanced transmit settings.
4. Displays the video source and format. Tap the encoder icon to define video encoder settings.
5. Displays the camera control frequency, the camera type and ID, RSSI (Received Signal Strength Indicator) or SNR (Signal to Noise Ratio) and tally indicator. Tap the camera number to define camera settings.
6. Displays settings, including network configuration, and audio settings. The four green/red bars at the bottom of the screen indicate the status of each of the four video inputs.