Home
Products
Product manuals and datasheets of BSI products.
Active UHF Splitter
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
Active UHF Splitter Manual
This manual contains safety information and information for installing, configuring, and operating a Real Freedom Active UHF Splitter (ISP‑3261).
Active UHF Splitter
Installation and configuration
This chapter contains the installation instructions for the Real Freedom Active UHF Splitter.
Overview

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
  - Active UHF Splitter Manual
    This manual contains safety information and information for installing, configuring, and operating a Real Freedom Active UHF Splitter (ISP‑3261).
    - Active UHF Splitter
      - Introduction
        The Real Freedom Active UHF Splitter is an optional component to add additional functionality to the Real Freedom Fiber Antenna Extender system.
      - Installation and configuration
        This chapter contains the installation instructions for the Real Freedom Active UHF Splitter.
        Overview
        Preparation
        Rack mount a UHF splitter
        Connections
        Configure a UHF splitter
      - Operation
        Once connected to the system and configured, no further changes are required to the Real Freedom Active UHF Splitter during the routine operation of the system.
      - Troubleshooting
        This chapter provides troubleshooting information for the Real Freedom Active UHF Splitter.
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for the Real Freedom Active UHF Splitter.
      - Technical data
        Technical drawings and connector pinouts for the Real Freedom Active UHF Splitter.
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Overview

The main installation and configuration steps for a Real Freedom Active UHF Splitter are as follows:

Optionally, rack mount the UHF splitter in a standard equipment rack.
You can install two UHF spitters side by side in the rack.
Connect the RF outputs from a Real Freedom Fiber Base unit to the Real Freedom Active UHF Splitter.
Connect the RF outputs from the Real Freedom Active UHF Splitter to Real Freedom Receivers.
From the receiver, monitor fiber optic signal levels, voltages, and currents of connected equipment, which can help to alert you when RF performance is affected. If RF levels are low, use the receiver to introduces extra gain into the system.