Transmit power and frequency

You must define the transmit power and frequency. Note that the transmit frequency set here and the receive frequency set on the receiver must be the same.

Table 1. Transmit configuration
Setting Description
TX Power

Defines the transmit output power. Move the slider to set the required power.

Transmit power directly impacts signal range. The more power, the longer the range. Increasing the power can also make the signal more stable, but keep in mind it can have a negative effect on battery life.

If the power is too low, the camera range may be insufficient resulting in loss of RF signal and video image.

Tap the transmit icon to display the Transmit page. Use this page to define advanced settings used to transmit the video signal.

When you have selected the appropriate settings, tap the Back icon to return to the main page.
Transmit Frequency (MHz)

Sets the transmit frequency assigned for your event.

Tap the current value, change the numbers to the required frequency and tap Done.

Note that you can keep the transmit and receive frequency at the same value by selecting the Update Receive Frequency option from the receiver’s Remote Tx Crtl menu. Then, if you change the transmit frequency, the receive frequency automatically changes to the same value.