Home
Products
Product manuals and datasheets of BSI products.
Fiber Antenna Extender
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
Fiber Antenna Extender Manual
This manual contains safety information and information for installing, configuring, and operating a Real Freedom Fiber Antenna Extender (IFB‑3211: Fiber Base Unit, IFR‑3211: Fiber Remote Unit).
Fiber Antenna Extender
Technical data
Technical drawings, specifications, and connector pinouts for the Real Freedom Fiber Antenna Extender.
Specifications

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
  - Fiber Antenna Extender Manual
    This manual contains safety information and information for installing, configuring, and operating a Real Freedom Fiber Antenna Extender (IFB‑3211: Fiber Base Unit, IFR‑3211: Fiber Remote Unit).
    - Fiber Antenna Extender
      - Introduction
        The Real Freedom Fiber Antenna Extender provides unparalleled flexibility of operation. Multiple RF cameras incorporating camera control may be deployed from a single remote site utilizing just a single SMPTE hybrid fiber cable.
      - Installation and configuration
        This chapter contains the installation and configuration instructions for the Real Freedom Fiber Antenna Extender (fiber base and fiber remote units).
      - Operation
        Once connected to the system and configured, no further changes are required to the Real Freedom Fiber Antenna Extender during the routine operation of the system.
      - Troubleshooting
        This chapter provides troubleshooting information for the Real Freedom Fiber Antenna Extender.
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Real Freedom Fiber Antenna Extenders.
      - Technical data
        Technical drawings, specifications, and connector pinouts for the Real Freedom Fiber Antenna Extender.
        Fiber base unit dimensions
        Fiber remote unit dimensions
        Specifications
        Connector pinout assignments
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
  - Datasheet
    The Real Freedom Fiber Antenna Extender allows you to deploy multiple RF cameras incorporating camera control from a single remote site utilizing a fiber cable.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Specifications

The following tables contain the specifications for the Real Freedom Fiber Antenna Extender.

View the Real Freedom Fiber Antenna Extender datasheet.

Environmental

Table 1. Operating and storage specifications
Parameter	Specification
Humidity	95% non-condensing
Ingress	Weatherproof to IP67
Operating/storage temperature	14° to 149°F / -10° to +65°C

Fiber inputs (fiber base unit)

Table 2. Fiber base unit fiber input specifications
Parameter	Specification
Type	SMPTE 311M single mode (single mode APC available on request)
Connector	LEMO FXW.3K.93C.TLM

Fiber outputs (fiber remote unit)

Table 3. Fiber remote unit fiber output specifications
Parameter	Specification
Type	SMPTE 311M single mode (single mode APC available on request)
Connector	LEMO EDW.3K.93C.TLC

Physical (fiber base unit)

Table 4. Fiber base unit size, weight and mounting specifications
Parameter	Specification
Size (W x H x D)	3.93 x 5.82 x 1.9 in / 100 x 148 x 48.38 mm
Weight	2.75 lb. / 1.251 kg
Mounting	Pole clamp with ¼-20 fitting

Physical (fiber remote unit)

Table 5. Fiber remote unit size, weight and mounting specifications
Parameter	Specification
Size (W x H x D)	2.95 x 5.47 x 1.14 in / 75 x 139 x 29 mm
Weight	1.8 lb. / 0.82 kg
Mounting	Pole clamp with ¼-20 fitting

Power (fiber base unit)

Table 6. Fiber base unit power specifications
Parameter	Specification
DC supply	9–36 V DC, via LEMO
DC supply connector	LEMO 0K 4-Pin CLL.0K.304.CLLP
DC fiber remote power	36 V DC to IEC/EN 60950-1
LED	Green - Power On Comms OK, Red - Fault No Comms

Power (fiber remote unit)

Table 7. Fiber remote unit power specifications
Parameter	Specification
Connector	Via fiber connector or LEMO 0K 2-pin
Aux DC supply	9–36 V DC (required for > 2 km fiber length)
LED	Green - Power On Comms OK, Red - Fault No Comms

RF inputs (fiber remote unit)

Table 8. Fiber remote unit RF input specifications
Parameter	Specification
Number of inputs	2
Impedance	75 Ohm
Frequency range	50–850 MHz
Connector	BNC (F)

RF outputs (fiber base unit)

Table 9. Fiber base unit RF output specifications
Parameter	Specification
Number of outputs	2 (2 x 6 with optional Active UHF Splitter)
Impedance	75 Ohm
Frequency range	50–850 MHz
Connector	BNC (F)