Home
Products
Product manuals and datasheets of BSI products.
Mini-Tx UHD
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
MT-UHD Manual
This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
Mini-Tx UHD
Introduction
The award winning Mini-TX UHD is the world's smallest ultra-low latency UHD wireless video transmitter on the market, measuring just 85mm long by 56mm wide and 28mm deep.
Location and functions of parts
Bottom view

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
  - MT-UHD Manual
    This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
    - Mini-Tx UHD
      - Introduction
        The award winning Mini-TX UHD is the world's smallest ultra-low latency UHD wireless video transmitter on the market, measuring just 85mm long by 56mm wide and 28mm deep.
        
        Location and functions of parts
        Top view
        Front view & side view
        Bottom view
      - Installation
        This chapter contains the installation instructions for the Mini Tx UHD.
      - Transmitter Configuration
        Once powered, use the joystick on the Mini Tx UHD to configure the transmitter and view status information.
      - Operation
        Once connected and correctly configured, no further changes are generally required to the Mini-Tx UHD during routine operation.
      - Troubleshooting
        This chapter provides troubleshooting information for the Mini Tx UHD.
      - Update the transmitter’s firmware
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.
      - Technical Data
      - Safety and regulatory compliance
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Bottom view

View the bottom view of Mini-Tx UHD for single input and quad input below,Mini-Tx UHD Single Input.

Mini-Tx UHD Single Input


Key	Component	Description
1	CAM CTRL	Use to connect the camera back transmitter to the ‘Remote’ port on the camera to control camera settings. See Cable for Remote ports to connect different cameras to the Mini-Tx UHD. Connector: LEMO 0B 7-pin.
2	AUDIO	Use to connect a microphone or audio signal from signal-processing equipment and mixing consoles. Connector: LEMO 0B 6-pin
3	SDI	Use to connect the Mini-Tx UHD to the camera’s SDI port if you are using SDI as the video source. Connector: HD-BNC (F).
4	DC	Use to connect an external DC power supply(8-20 V) to power the Mini-Tx UHD. Connector: LEMO 0B 2-pin

Mini-Tx UHD Quad Input

Note: The front panel board of Mini-Tx UHD has three versions of SDI input which are all valid, single UHD input, Quad 12G, and Quad 3G-CXP input.


Key	Component	Description
1	AUX	Use for auxiliary data and analog audio input. Connector: LEMO 0B 9-pin
2	SDI IN 1	Use to connect the Mini-Tx UHD to the camera’s SDI port if you are using SDI as the video source. The Mini-Tx UHD has the following versions of SDI input- single UHD input, quad 12G input, and quad 3G-CXP input. Connector: HD-BNC (F).
3	SDI IN 2
4	SDI IN 3
5	SDI IN 4
6	8-20 V DC	Use to connect an external DC power supply to power the Mini-Tx UHD. Connector: LEMO 0B 2-pin