Home
Products
Product manuals and datasheets of BSI products.
Mini-Tx UHD
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
MT-UHD Manual
This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
Mini-Tx UHD
Technical Data
Specifications

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
  - MT-UHD Manual
    This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
    - Mini-Tx UHD
      - Introduction
        The award winning Mini-TX UHD is the world's smallest ultra-low latency UHD wireless video transmitter on the market, measuring just 85mm long by 56mm wide and 28mm deep.
      - Installation
        This chapter contains the installation instructions for the Mini Tx UHD.
      - Transmitter Configuration
        Once powered, use the joystick on the Mini Tx UHD to configure the transmitter and view status information.
      - Operation
        Once connected and correctly configured, no further changes are generally required to the Mini-Tx UHD during routine operation.
      - Troubleshooting
        This chapter provides troubleshooting information for the Mini Tx UHD.
      - Update the transmitter’s firmware
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.
      - Technical Data
        Specifications
        Connector pinout assignments
      - Safety and regulatory compliance
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Specifications

The following tables contain the specifications for the Mini-Tx UHD.

Audio


Parameter	Specification
Embedded SDI	Up to 4 Channels
Analog	Up to 2 Channels
Analog Level	Mic/Line Selectable
Analog Level Max	+18 dBu (balanced)
Analog Phantom Power	User selectable between 5V, 8V, and 48V
Analog Encoding	MPEG1-L2

Video


Parameter	Specification
Input Format	12G / Dual 6G and Quad 3G / HD SDI
Supported Resolution	3840x2160p59/50/29/25/24/23, 1920x1080p59/50/29/25/24/23, 720p59/50, 1920x1080i59/50(Interlaced), Square division UHD, 2048x1080p, 4096x2160p
Video Encoding	HEVC (H.265) and AVC (H.264)
Max Bit Rate	63.3 Mbps
Bit Depth	10-bit or 8-bit
Chroma Format	4:2:2 and 4:2:0
Quad Features	Independent HD encoder control, Independent bit rate cotrol

Camera Control


Parameter	Specification
Protocols	Sony, BSI, Grass Valley, Ikegami, Visca, InCar, POV, Pelco, DreamChip
Data Format	CAN Bus, RS232, RS485 serial
Return Data	Status, CAN bus, Battery (Volts), Temp, GNSS, etc.
Tx Remote Control	RF Freq, Power, Modulation, Audio gain, etc.
Data Transmit*	Power and BSI Data over SDI (HD only)
Camera Power	Battery volts (2A current limit)
Local & Remote UI	LCD display and Joystick navigation, Wi-Fi (iPhone/ Android), Ethernet (via USB)
Integrated GNSS*	GPS (L1 C/A), Galileo (E1 B/C), BeiDou (B1 L), GLONASS (L1 O/F)
Integrated Accelerometer*	Not initially supported
Integrated Wi-Fi	2.4GHz 802.11b/g/n
Integrated Bluetooth*	Not initially supported

RF (Tx)


Parameter	Specification
Scheme	DVB-T
Bandwidth	5, 6, 7, 8MHz
Frequency*	1.4-1.6GHz & 6.4-7.5GHz , 2.0-2.5GHz & 6.4-7.5GHz
Tuning Step	250KHz
Level	10-100 mW (inc. Pre-Distortion)
Pedestal	Single, Dual
DVB-T Bit-rates	3.8 to 31.7 Mbps per pedestal

RF (Rx)


Parameter	Specification
Band	430-470 MHz (dual frequency diversity)
Bandwidth	25kHz
Tuning Step	6.25 kHz & 10kHz

Connectors


Parameter	Specification
RF Tx Out	2 x SMA(f)
UHF Rx In	SMA(f)
SDI Video In	HD-BNC(f)
Analog Audio In	LEMO 0B 6-pin(f)
Camera Control	LEMO 0B 7-pin(f)
Audio/Camera Control	Lemo 0B 9-pin(f) (Quad version only)
Power	LEMO 0B 2-pin(f)
USB	Micro type A/B 5-pin(f)

Physical


Parameter	Specification
Dimensions	(85.0x55.3x28.4) mm (incl. connectors)
Weight	185g (Single Input), 190g (Quad Input)

Environmental


Parameter	Specification
Temperature	-20 to +45 degrees C
Humidity	95% non-condensing
Sealing	IP65

Future Releases (*)


Parameter	Specification
Supported Resolutions	PSF formats
Data Transmit	Power and BSI Data over SDI (UHD)
Scheme	DVB-T2, ISBD-T
Integrated Accelerometer	9-axis 3D Accelerometer, Gyroscope and Magnetometer
Integrated Bluetooth	Bluetooth 4.1

Note: Specifications are subject to change without notice.