Home
Products
Product manuals and datasheets of BSI products.
Mini-Tx UHD
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
MT-UHD Manual
This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
Mini-Tx UHD
Operation
Once connected and correctly configured, no further changes are generally required to the Mini-Tx UHD during routine operation.
Status LEDs

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
  - MT-UHD Manual
    This manual contains safety information and information for installing, configuring, and operating a Mini-Tx UHD.
    - Mini-Tx UHD
      - Introduction
        The award winning Mini-TX UHD is the world's smallest ultra-low latency UHD wireless video transmitter on the market, measuring just 85mm long by 56mm wide and 28mm deep.
      - Installation
        This chapter contains the installation instructions for the Mini Tx UHD.
      - Transmitter Configuration
        Once powered, use the joystick on the Mini Tx UHD to configure the transmitter and view status information.
      - Operation
        Once connected and correctly configured, no further changes are generally required to the Mini-Tx UHD during routine operation.
        Status LEDs
        Routine checks
      - Troubleshooting
        This chapter provides troubleshooting information for the Mini Tx UHD.
      - Update the transmitter’s firmware
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for Mini-Tx UHD.
      - Technical Data
      - Safety and regulatory compliance
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Status LEDs

Use the LED indicators on the Mini Tx UHD to help you to determine whether the transmitter is operating correctly.

Note: In the bottom view of the Mini-Tx UHD, the left LED represents camera control and UHF. The right LED represents Video, GPS, and Wi-Fi.


LED	LED state	Meaning	Note
Camera Control	Solid Red	The camera control frequency is set incorrectly at the data transmitter, or the Mini-Tx UHD is too far away from the data transmitter to pick up the control data.	RSSI <100
	Solid Amber	There is no good connection between the data transmitter and the Mini-Tx UHD	RSSI <80
	Solid Green	There is a good signal between the data transmitter and the Mini-Tx UHD	Good RSSI
	Flashing Amber	There is a limited data for the camera number.	RSSI <80
	Flashing Green	Data for the camera number is good	Good RSSI
Video	Red	There is no connection to the link or video format to perform encoding operations.
	Amber	Cannot encode some links Invalid forced format Links are missing	MultiStream Video Mode
	Amber	Bad links or missing quad links Mismatched forced format Error in encoding operation	Auto, others
	Green	Encoding on all enabled inputs	MultiStream Video Mode
	Green	Encoding successful	Auto, others
GPS	Blue	When GPS is turned On from Off LED blinks blue once. Thereafter, LED blinks blue every 2sec on GPS fix.
Wi-Fi	Magenta	Wi-Fi access point is enabled LED blinks magenta every 2sec in alternance with LED of GPS

Table 15: Mini Tx UHD LED status indications