01 Decoder 1 | 02 Decoder 2 | 03 Decoder 3
Configuration options described below apply to the respective Decoders 01, 02, and 03. Use these options to modify the settings for each decoder.
Tip: Use theVyuSync Decoder Mind Map to navigate through its configuration
options and adjust the settings.
01 Decoder
| Setting | Description | |
|---|---|---|
| 01 Status | Indicates the status of video format, quadlink mode, standard of the video. | |
| 02 Configure | 01 Select Camera/Pgm | Use to set the required camera number. |
| 02 Dual HEVC decode | Forces the decoder to decode dual HEVC videos. | |
| 03 HEVC UHD Decode | Forces the decoder to decode a single HEVC 4K video. | |
| 04 H264/MPEG Decode | Forces the decoder to decode a H264 video. | |
| 05 Codec: HEVC/H.264 | Forces the decoder to decode a HEVC video. | |
| 03 Cameras/PIDs Info |
Defines the packet identifier (PID) to identify the PID number for audio and video. Dec1 Core represents core of video streams in Decoder 1. Prog/Cam represents the camera number. (If each of the 3 decoders in the VyuSync is decoding 2 streams of video, then the Prog/Cam number will be 0 & 1 for decoder 1, 2 & 3 for decoder 2, 4 & 5 for decoder 3). Cores of decoder 2 and 3 can be found in its respective menu options. |
|
| 04 Restore Defaults | Use to remove all the settings applied to the decoder and restore to its original state. | |
| 05 Refresh decoder | Use to reload/recharge the decoder with power and information. | |