05 Configure

Setting	Description
01 Freeze/Blk no ASI	01 Freeze on ASI loss	Freeze frame on ASI loss for all the decoders.
02 Black on ASI loss	Black screen on ASI loss for all the decoders.
02 Network Config	01 Source IP Address	Display IP address of all the three decoders.
02 Target IP Address	Enter the required IP address (for example,010.224.150.255) to identify the decoder on the network. When connecting the decoder to another point, the same Target IP address must be used except the last subnet number which can be any number between 0 to 254.
03 Target UDP Port	User Datagram Protocol (UDP) is a communications protocol that is primarily used to establish low-latency and loss-tolerating connections between applications on the internet.
04 Static IP or DHCP	01 Static IP Address	IP address that is assigned to the decoder that does not change. Use to access the decoder with the same address.
02 DHCP IP Address	IP Address that is assigned by the Dynamic Host Configuration Protocol (DHCP) server to interact with the decoder.
05 Time to Live	Time to live (TTL) refers to the amount of time that a packet is set to exist inside a network before being discarded by a router.
03 TS Over Ethernet	01 Set Ethernet PIDs	Choose the respective PID filter to transport over ethernet.
02 Stream Telemetry	Choose to send telemetry in transport stream.
03 Ethernet TS OFF!	Choose to turn OFF the transport stream over ethernet.
04 Stream Entire TS	Choose to transport entire stream over ethernet.
05 Set # TS Packets	Enter the number of transport stream packets that is to be sent per ethernet packet.
06 Set Timeout Value	This is an option that let's you decide how long you are willing to wait for an operation in a workstation client before your request for that operation is canceled (timed out) on a network.
04 All Decs Defaults	All decoders will be set to its default settings.
05 Dec Upgrade Mode	01 Upgrade using ASI	Upgrades the respective decoders via ASI input. The format of the file here is ASI, which is provided by BSI.
02 Upgrade using FTP	Upgrades the respective decoders via file transfer protocol.
06 Analog Audio	Use to enable or disable the analog audio.

01 Freeze/Blk no ASI

01 Freeze on ASI loss

Freeze frame on ASI loss for all the decoders.

02 Black on ASI loss

Black screen on ASI loss for all the decoders.

02 Network Config

01 Source IP Address

Display IP address of all the three decoders.

02 Target IP Address

Enter the required IP address (for example,010.224.150.255) to identify the decoder on the network. When connecting the decoder to another point, the same Target IP address must be used except the last subnet number which can be any number between 0 to 254.

03 Target UDP Port

User Datagram Protocol (UDP) is a communications protocol that is primarily used to establish low-latency and loss-tolerating connections between applications on the internet.

04 Static IP or DHCP

01 Static IP Address

IP address that is assigned to the decoder that does not change. Use to access the decoder with the same address.

02 DHCP IP Address

IP Address that is assigned by the Dynamic Host Configuration Protocol (DHCP) server to interact with the decoder.

05 Time to Live

Time to live (TTL) refers to the amount of time that a packet is set to exist inside a network before being discarded by a router.

03 TS Over Ethernet

01 Set Ethernet PIDs

Choose the respective PID filter to transport over ethernet.

02 Stream Telemetry

Choose to send telemetry in transport stream.

03 Ethernet TS OFF!

Choose to turn OFF the transport stream over ethernet.

04 Stream Entire TS

Choose to transport entire stream over ethernet.

05 Set # TS Packets

Enter the number of transport stream packets that is to be sent per ethernet packet.

06 Set Timeout Value

This is an option that let's you decide how long you are willing to wait for an operation in a workstation client before your request for that operation is canceled (timed out) on a network.

04 All Decs Defaults

All decoders will be set to its default settings.

05 Dec Upgrade Mode

01 Upgrade using ASI

Upgrades the respective decoders via ASI input. The format of the file here is ASI, which is provided by BSI.

02 Upgrade using FTP

Upgrades the respective decoders via file transfer protocol.

06 Analog Audio

Use to enable or disable the analog audio.