Camera control settings
Tap the camera number icon to display the Camera Control page. Use this page to enter details of the of the camera that you are using. It is important to enter all the settings correctly so that the camera transmitter can communicate with the camera.
When you have selected the appropriate settings, tap the Back icon to return to the main page.
| Setting | Description |
|---|---|
| Camera ID |
Specifies the camera ID number. Tap the current ID, set the required camera number, and then tap Done. Note that the camera ID is shown on the camera’s Operator Control Panel/Remote Control Panel. |
| Camera Type |
Defines the camera type. Tap the current type, choose the camera type that you want, and then tap Done. |
| Call: Sony |
Camera Type set to ‘Sony’. Sony Call is required on Sony camcorder-style cameras to allow tally to operate. |
| GV Series |
Camera Type set to ‘Grass Valley’. Tap to define the camera series, either ‘LDK’ or ‘LDX’. |
| Ikegami Mode |
Camera Type set to ‘Ikegami’. Tap to select the value mode, ‘Absolute’ or ‘Relative’. Refer to the camera’s operator control panel manual for an explanation of these settings. |