Mounting procedure: two fiber base units next to a receiver

To mount two fiber base units next to a receiver, you will require 2RU (3.5 inches, 89 mm) of vertical rack space and a Real Freedom Rx Dual Fiber Base Mount Kit (20005-9-075).

  1. Place one fiber base unit on top of the other and attach the Rx & Dual Fiber Base Rack Brackets using four M4 x 20 Phillips screws per bracket.

  2. Attach the Rx Joining Block to the side of the receiver using two M4 x 20 Phillips screws.

    You need to install this block using the bottom two screw holes next to the receiver’s handle.

  3. Attach the Bracket Fixing 2U to the other side of the receiver using four M5 x 12 Phillips screws.
  4. Place the receiver next to the fiber base units.
  5. Connect the front Rx & Dual Fiber Base Rack Bracket to the Rx Joining Block using an M5 x 20 Phillips screw inserted through the bracket into the joining block.

  6. Insert an M5 x 50 Phillips screw through the bottom of the Rx Joining Block and screw into the Rx & Dual Fiber Base Rack Bracket.

  7. Install the connected units at the desired location in the equipment rack and secure to the vertical uprights using four rack screws.