Home
Products
Product manuals and datasheets of BSI products.
Fiber Base (Rack Mount)
Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
Fiber Base (Rack Mount) Manual
This manual contains safety information and information for installing, configuring, and operating a Real Freedom Fiber Base (Rack Mount).
Fiber Base (Rack Mount)
Installation and configuration
This chapter contains the installation instructions for the Real Freedom Fiber Base (Rack Mount).
Rack mount a fiber base unit

Products
Product manuals and datasheets of BSI products.
- Mini-Tx UHD
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Mini-Tx UHD.
- Real Freedom Receiver
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Real Freedom Receiver.
- Downconverter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Downconverter.
- Data Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Data Transmitter.
- Fiber Antenna Extender
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Antenna Extender.
- Active UHF Splitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Active UHD Splitter
- Fiber Base (Rack Mount)
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Fiber Base (Rack Mount) unit.
  - Fiber Base (Rack Mount) Manual
    This manual contains safety information and information for installing, configuring, and operating a Real Freedom Fiber Base (Rack Mount).
    - Fiber Base (Rack Mount)
      - Introduction
        The Real Freedom fiber system provides unparalleled flexibility of operation. Multiple RF cameras incorporating camera control may be deployed from a single remote site utilizing a single SMPTE hybrid fiber cable.
      - Installation and configuration
        This chapter contains the installation instructions for the Real Freedom Fiber Base (Rack Mount).
        Overview
        Preparation
        Rack mount a fiber base unit
        Mounting procedure: two fiber base units next to a receiver
        Mounting procedure: two fiber base units side by side
        Connections
        Configure a fiber base unit
      - Operation
        Once connected to the system and configured, no further changes are required to the Real Freedom Fiber Base (Rack Mount) unit during the routine operation of the system.
      - Troubleshooting
        This chapter provides troubleshooting information for the Real Freedom Fiber Base (Rack Mount).
      - Maintenance
        This chapter describes the maintenance, cleaning, and storage procedures for the Real Freedom Fiber Base (Rack Mount).
      - Technical data
        Technical drawings and connector pinouts for the Real Freedom Fiber Base (Rack Mount).
      - Safety and regulatory compliance
        Important safety and electromagnetic compatibility information.
- Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the Camera Back Transmitter.
- 4K Camera Back Transmitter
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the 4K Camera Back Transmitter.
- VyuSync HEVC Decoder
  Provides detailed information and instructions on how to use, operate, assemble, install, troubleshoot, or maintain the VyuSync Decoder.

Rack mount a fiber base unit

The Real Freedom Fiber Base (Rack Mount) is designed to be mounted in a standard 19-inch (48.3 cm) equipment rack. The unit is 1RU high and half rack width.

Note: You can also place a fiber base unit on a solid, stable surface.

Tools

To rack mount a Real Freedom Fiber Base (Rack Mount), you will require the following tools:

#3 Phillips head screwdriver

Precautions

You should read these precautions before you install a Real Freedom Fiber Base (Rack Mount) in an equipment rack.

Before you begin the installation, make sure that the fiber base unit is disconnected from the power source.
Close any open spaces in the rack with blank panels since open spaces will reduce cooling efficiency.
To prevent risk of overheating, use in a well-ventilated area.
Since there is no power button (on/off switch) on the fiber base unit, ensure that you have access to the rear of the rack or leave a sufficient wire management loop to pull the unit out from the front of the rack.